|
What is ISO setting on your digital SLR (DSLR) camera and how do you use it? The letters ISO on your digital camera settings refer to the film speed. Even though your camera is most likely not film at all, but rather digital, the ISO setting still does has the same function as older film cameras. ISO determines how sensitive the image sensor is to light The most common ISO speed settings are: 100, 200, 400 and 800. Depending on your digital camera model you may also have them in the range of 64, 100, 160, 200, 400, 640, 800, 1600. On a Canon digital 400D (also known as Rebel XTi) you can see what the ISO setting is by looking at the rear LCD. This is similar to most SLR digital cameras. If you can't see this in your specific model, refer to your manual. As you can see by the example on the right, the ISO in this case is set at 100. The lower the ISO number, the slower the speed. The higher the ISO number, for example 1600 the faster the speed. General Rules and tips for ISO Settings: Use an ISO of 100 or 200 when taking photographs outside in sunny conditions. If the sky is overcast or it is evening time, then use an ISO within the range of 400 to 800. Night time or in cases of low light you might need to set your digital camera ISO to 1600. If you don't then your photo will appear too dark if at all. How does the ISO speed affect the photographs end result? If you set your digital camera to a low ISO, for example 100, the resulting photograph will be better quality than one set at 1600. The higher the ISO the more grainy the photo will look. Therefore go for a low ISO number whenever possible. However there are circumstances where a lower quality photograph is better than none at all. For example taking photographs of fish in a dark aquarium would normally be out of range for most point and shoot cameras. As you can see by the image below, setting my SLR camera to a high 1600 ISO made this task possible. Otherwise there would not have been enough light let in to the sensor and the image would have turned out totally black Of course I could have chosen a lower ISO and used my cameras inbuilt flash. However this would have resulted in unwanted flash glare bouncing off the glass. With this in mind a higher ISO (say 800) is also recommended if you want to take photographs of people inside in the evening without using a flash. How to change your digital cameras ISO setting? To change the ISO setting on your SLR camera, press the ISO button then use the 'up down left and right buttons' to change the speed. Again, if you don't have this option refer to your cameras manual as it may be slightly different between brands. Note: When your digital camera is in automatic mode, the ISO speed is chosen for you to suit the level of light available at that particular time. A manual mode I photograph in quite often is called Program AE. With Program AE you can choose the ISO you wish to photograph in and the digital camera then sets the shutter speed and aperture (exposure) automatically to suit. I like to think of it as being similar to an ISO priority option. To use Program AE change your mode dial to P, like the example image on the right. If you're a beginner in using an SLR camera, you'll find it takes some time to get used to setting your ISO correctly. I can't count how many times I've kept my ISO at 100 and tried taking a fast night shot to find the photo turning out completely black. However after six months or so taking photographs in all different situations, you'll soon find it becomes second nature. Like anything new, it just takes practise.
(Rated by 1 Council Member)
|
