Home > Categories > Science and Technology > Engineering  

Latest Engineering Advice  (What's this category about?)

BROWSE ENGINEERING ADVICE:
 From:  preethi, india, Mar/17/11 submitted on: Ammas.com
Subject:  classes taught during inplant training f...
Question:  classes taught during inplant training for ECE dept

Rate = 3 (Rated by 2 Council Members)

Kiran Kumar,
Registered Member
  Ammas.com
  1)BASIC ELECTRONICS FOR SEMICONUCTOR DEVICES 2)BASIC EMBEDDED SYSTEMS WITH HITECH "C" 3)SOLDERING PRACTICE FOR PCB BOARD ASSEMBLING 4)SENSOR ,TRANSDUCER ALL TYPE 5)ORCAD PRACTICE FOR CIRCUIT DESIG

... Full advice ...
Rate = 3 (Rated by 1 Council Members)

 
Ramakrishnan TV,
Council Member
  Ammas.com
  The training may contain some lectures but not necessarly. In India, i dont think any company worth the name puts the trainees in some class room instruction.The maximum which onew may expect is that

... Full advice ...
Rate = 2.5 (Rated by 1 Council Members)

 
 From:  Anonymous, United States, Mar/04/11 submitted on: AnswerPod.com
Subject:  What is a catch basin?
Question: 

Here is the question: What is a catch basin?

Rate = 2.5 (Rated by 2 Council Members)

Shrimathi Sriram,
Registered Member
  Ammas.com
  A catch basin is a part of a storm drain or sewer system which is designed to trap debris so that it cannot enter the drainage pipes. Catch basins are a large scale version of the traps used in home d

... Full advice ...
Rate = 4 (Rated by 1 Council Members)

 
C. Raj, United Kingdom,
Council Member
  Ammas.com
  A catch basin is a part of a storm drain or sewer system which is designed to trap debris so that it cannot enter the drainage pipes. Catch basins are a large scale version of the traps used in home d

... Full advice ...
Rate = 3 (Rated by 1 Council Members)

 
 From:  Anonymous, United States, Feb/16/11 submitted on: AnswerPod.com
Subject:  What's the top speed of the corvette zr1
Question: 

Here is the question: What's the top speed of the corvette zr1

Rate = 2.5 (Rated by 2 Council Members)

Sasi Bhushan,
Council Member
  Ammas.com
  The top speed is 205mph Best Regards Sasibhushan

... Full advice ...
Rate = 4 (Rated by 1 Council Members)

 
C. Raj, United Kingdom,
Council Member
  Ammas.com
  Top speed of the corvette zr1 is 205 miles per hour

... Full advice ...
Rate = 3.5 (Rated by 1 Council Members)

 
 From:  Anonymous, United Kingdom, Feb/15/11 submitted on: AnswerPod.com
Subject:  Can you please answer this question?
Question: 

Here is the question: How does a bbone grapht work please wb

Rate = 2 (Rated by 4 Council Members)

Sasi Bhushan,
Council Member
  Ammas.com
  The question is not clear are you talking about bone grafting ?

... Full advice ...
Rate = 2 (Rated by 1 Council Members)

 
 From:  vinod kumar, india, Jan/09/11 submitted on: Ammas.com
Subject:  what is the rank needed for OC's to get ...
Question:  what is the rank needed for OC's to get a seat in nit warangal in the department of aeronautical engneering

Rate = 2 (Rated by 2 Council Members)

vineet saxena,
Council Member
  Ammas.com
  Hi Vinod, Nobody can benchmark the rank as it depends on the overall performance of the students appearing in that particular year. You may visit, http://ccb.nic.in/CCB2008/OrCr/Engi….

... Full advice ...
Rate = 3 (Rated by 2 Council Members)

 
Avilash Mallik,
Council Member
  Ask Agent
  Hi, Sorry to inform you that there is no Aeronautical Engineering course offered at NIT Warangal as i found. If i am wrong please do let me know, I will be happy with the reply.

... Full advice ...
Rate = 2.5 (Rated by 2 Council Members)

 
srikantiah g.r,
Featured Member
  Ammas.com
  On the presumption that OC refers to Other Category ie unreserved,it will be rank within 1000

... Full advice ...
Rate = 1.5 (Rated by 1 Council Members)

 
sambasivan s,
Council Member
  Ammas.com
  Hello

As you know the cut off mark is not a fixed one. It varies from year to year. You aim for scoring as much high mark as possible. Then apply.

best wishes

... Full advice ...
Rate = 1 (Rated by 1 Council Members)

 

Page  1 2 3 4 5 6 7 8 9 10